The Volta Basin Water Allocation System: assessing the impact of small-scale reservoir development on the water resources of the Volta basin, West Africa

In the Volta Basin, infrastructure watershed development with respect to the impact of climate conditions is hotly debated due to the lack of adequate tools to model the consequences of such development. There is an ongoing debate on the impact of further development of small and medium scale reservoirs on the water level of Lake Volta, which is essential for hydropower generation at the Akosombo power plant. The GLOWA Volta Project (GVP) has developed a Volta Basin Water Allocation System (VB-WAS), a decision support tool that allows assessing the impact of infrastructure development in the basin on the availability of current and future water resources, given the current or future climate conditions. The simulated historic and future discharge time series of the joint climate-hydrological modeling approach (MM5/WaSiM-ETH) serve as input data for a river basin management model (MIKE BASIN). MIKE BASIN uses a network approach, and allows fast simulations of water allocation and of the consequences of different development scenarios on the available water resources. The impact of the expansion of small and medium scale reservoirs on the stored volume of Lake Volta has been quantified and assessed in comparison with the impact of climate variability on the water resources of the basin

Computer Science Student-Centered Instructional Continuum

The Computer-Science Student-Centered Instructional Continuum (CS-SCIC) is a new framework to support PreK-12 instructors in their lesson design. Educators are faced with choices when building lessons; there is a tension between direct instruction, constructivism and constructionism and difficulty in providing differentiated instruction. Theoretically aligned to Vygotsky’s zone of proximal development, CS-SCIC places research-based instructional strategies on a simple learning continuum. Teachers use the continuum to discuss, review and design learning events. Used internationally, initial qualitative feedback from teachers who attended pilot CS-SIC workshops was emphatically positive. Future work includes more feedback from academia and formal research, including pre and post-professional development workshop surveys

Bayesian retrieval of complete posterior PDFs of oceanic rain rate from microwave observations

A new Bayesian algorithm for retrieving surface rain rate from Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) over the ocean is presented, along with validations against estimates from the TRMM Precipitation Radar (PR). The Bayesian approach offers a rigorous basis for optimally combining multichannel observations with prior knowledge. While other rain-rate algorithms have been published that are based at least partly on Bayesian reasoning, this is believed to be the first self-contained algorithm that fully exploits Bayes’s theorem to yield not just a single rain rate, but rather a continuous posterior probability distribution of rain rate. To advance the understanding of theoretical benefits of the Bayesian approach, sensitivity analyses have been conducted based on two synthetic datasets for which the “true” conditional and prior distribution are known. Results demonstrate that even when the prior and conditional likelihoods are specified perfectly, biased retrievals may occur at high rain rates. This bias is not the result of a defect of the Bayesian formalism, but rather represents the expected outcome when the physical constraint imposed by the radiometric observations is weak owing to saturation effects. It is also suggested that both the choice of the estimators and the prior information are crucial to the retrieval. In addition, the performance of the Bayesian algorithm herein is found to be comparable to that of other benchmark algorithms in real-world applications, while having the additional advantage of providing a complete continuous posterior probability distribution of surface rain rate

MITO measurements of the Sunyaev-Zeldovich Effect in the Coma cluster of galaxies

We have measured the Sunyaev-Zeldovich effect towards the Coma cluster (A1656) with the MITO experiment, a 2.6-m telescope equipped with a 4-channel 17 arcminute (FWHM) photometer. Measurements at frequency bands 143+/-15, 214+/-15, 272+/-16 and 353+/-13 GHz, were made during 120 drift scans of Coma. We describe the observations and data analysis that involved extraction of the S-Z signal by employing a spatial and spectral de-correlation scheme to remove a dominant atmospheric component. The deduced values of the thermal S-Z effect in the first three bands are DT_{0} = -179+/-38,-33+/-81,170+/-35 microKelvin in the cluster center. The corresponding optical depth, tau=(4.1+/-0.9) 10^{-3}, is consistent (within errors) with both the value from a previous low frequency S-Z measurement, and the value predicted from the X-ray deduced gas parameters.Comment: Ap.J.Letters accepted, 4 pages, 2 figure

Geographical interdependence, international trade and economic dynamics: the Chinese and German solar energy industries

The trajectories of the German and Chinese photovoltaic industries differ significantly yet are strongly interdependent. Germany has seen a rapid growth in market demand and a strong increase in production, especially in the less developed eastern half of the country. Chinese growth has been export driven. These contrasting trajectories reflect the roles of market creation, investment and credit and the drivers of innovation and competitiveness. Consequent differences in competiveness have generated major trade disputes

Focal Plane Alignment Utilizing Optical CMM

In many applications, an optical detector has to be located relative to mechanical reference points. One solution is to specify stringent requirements on (1) mounting the optical detector relative to the chip carrier, (2) soldering the chip carrier onto the printed circuit board (PCB), and (3) installing the PCB to the mechanical structure of the subsystem. Figure 1 shows a sketch of an optical detector mounted relative to mechanical reference with high positional accuracy. The optical detector is typically a fragile wafer that cannot be physically touched by any measurement tool. An optical coordinate measuring machine (CMM) can be used to position optical detectors relative to mechanical reference points. This approach will eliminate all requirements on positional tolerances. The only requirement is that the PCB is manufactured with oversized holes. An exaggerated sketch of this situation is shown in Figure 2. The sketch shows very loose tolerances on mounting the optical detector in the chip carrier, loose tolerance on soldering the chip carrier to the PCB, and finally large tolerance on where the mounting screws are located. The PCB is held with large screws and oversized holes. The PCB is mounted loosely so it can move freely around. The optical CMM measures the mechanical reference points. Based on these measurements, the required positions of the optical detector corners can be calculated. The optical CMM is commanded to go to the position where one detector corner is supposed to be. This is indicated with the cross-hairs in Figure 2(a). This figure is representative of the image of the optical CMM monitor. Using a suitable tapping tool, the PCB is manually tapped around until the corner of the optical detector is at the crosshairs of the optical CMM. The CMM is commanded to another corner, and the process is repeated a number of times until all corners of the optical detector are within a distance of 10 to 30 microns of the required position. The situation is sketched in Figure 2(b) (the figure also shows the tapping tool and where to tap). At this point the fasteners for the PCB are torqued slightly so the PCB can still move. The PCB location is adjusted again with the tapping tool. This process is repeated 3 to 4 times until the final torque is achieved. The oversized mounting holes are then filled with a liquid bonding agent to secure the board in position (not shown in the sketch). A 10- to 30-micron mounting accuracy has been achieved utilizing this method.

Underwater Wireless Sensor Communications in the 2.4 GHz ISM Frequency Band

One of the main problems in underwater communications is the low data rate available due to the use of low frequencies. Moreover, there are many problems inherent to the medium such as reflections, refraction, energy dispersion, etc., that greatly degrade communication between devices. In some cases, wireless sensors must be placed quite close to each other in order to take more accurate measurements from the water while having high communication bandwidth. In these cases, while most researchers focus their efforts on increasing the data rate for low frequencies, we propose the use of the 2.4 GHz ISM frequency band in these special cases. In this paper, we show our wireless sensor node deployment and its performance obtained from a real scenario and measures taken for different frequencies, modulations and data transfer rates. The performed tests show the maximum distance between sensors, the number of lost packets and the average round trip time. Based on our measurements, we provide some experimental models of underwater communication in fresh water using EM waves in the 2.4 GHz ISM frequency band. Finally, we compare our communication system proposal with the existing systems. Although our proposal provides short communication distances, it provides high data transfer rates. It can be used for precision monitoring in applications such as contaminated ecosystems or for device communicate at high depth